PROTECTION

Battleships must be able to withstand repeated hits and continue fighting, so their armour expanse, distribution, and thickness are extremely important. In terms of expanse, the Bismarck devoted 19,082 mt to belt, deck, turret, underwater, and splinter armour, which amounted to 40% of its designed combat weight (47,870 mt). Only the 69,100 mt Japanese battleships of the Yamato class carried more armour (22,895 mt), ablet at a much smaller percentage (33.2%) of the ship's total weight.
Materials used.
The steels used to build the Bismarck were the end result of extensive research and development that began shortly after WWI ended. This led to the creation of armour and construction steel that was clearly superior to WWI products. In terms of specifics, the following criteria apply:
 · St 52. Construction grade steel with a tensile strength of 52-64 kg/mm², a strain of 21% and a yield point of 36-38 kg/mm².
 · KC n/A (Krupp cementite, new type). Face-hardened armour steel. This material contained 3.5-3.8% nickel, 2% chrome, 0.3% carbon, 0.3% manganese, and 0.2% molybdenum, and it was used for the side belt, turrets, barbettes, and conning towers. The 670 Brinell face-layer tapered in hardness as it extended into 40-50% of the plate's total thickness. Post WWII proving ground test indicated that KC was only slightly less resistant than British cemented armour (CA), and markedly superior to US Class A plates.
 · Wh (Wotan hart). Homogeneous armour steel with a tensile strength of 85-95 kg/mm², a strain of 20% and a yield point of 50-55 kg/mm². This material was used for the armoured decks, and, in the thickness employed aboard the Bismarck, was the equal of most foreign homogeneous plates.
 · Ww (Wotan weich). Homogeneous armour steel with a tensile strength of 65-75 kg/mm², a strain of 25% and a yield point of 38-40 kg/mm². This material was used for the longitudinal torpedo bulkheads.
Vertical Protection.

Kiel, March 1941. The 32cm lower main belt which covered 70% of the ship's waterline length, can be clearly seen here.

The external armoured citadel included a main KC vertical belt that was 320 mm thick, 4.8 meters wide, and 170.7 meters long. It covered 70% of the waterline (by far the greatest extent of any WWII battleship), and protected the armour deck, the upper platform deck, and part of the middle platform deck. The belt was backed with a 60 mm thick layer of teakwood that helped absorb shock damage, and it was bolted onto 16-25 mm thick side plating. The majority of the belt was located above the waterline (3.0/1.8 meters as designed, but 2.6/2.2 meters in practice), with the reasoning that shells are more likely to hit above than below the waterline. The citadel area above the main belt was armoured with 145 mm thick KC plates that protected the battery deck all the way to the armoured upper deck. This plating could also provide a protected waterplane area in the event of severe lists, decap and slow heavy APC shells, and stop light shells outright. Finally, lighter plating was mounted well forward and aft of the main belt (60 mm Wh forward and 80 mm Wh aft), and this protected nearly the entire waterplane area from splinter of light shell damage.
The belt armour was also inclined outward to increase its resistance in regions forward, abeam, and aft of the main turrets and their magazines, with the cambered sections occupying around 50% of the main belt's length. The outboard inclination was 17°, 10°, 7°, and 8-10° abreast turrets Anton, Bruno, Dora, and Cäsar respectively. This accorded additional protection while not compromising stability by compressing the bulk of the waterplane area inboard, and especially in the critical amidships area.
The hull was divided into transverse sections by 22 bulkheads that varied in thickness. The KC armoured bulkhead between sections XIX and XX (frame 202.7) was located in front of turret "Anton", and it marked the citadel's forward limit. This bulkhead extended from the upper deck down to the middle platform deck, and varied in thickness as it descended (145 mm at the level of the battery and armour decks, 220 mm thick at the upper platform deck, and 180 mm at the middle platform deck). It was partially shielded by the ship's 60 mm forward plating, which presented very poor attack angles to shells being fired from the bow quarters. Aft of turret "Dora", between sections II and III (frame 32), there was another armoured transverse bulkhead of similar characteristics, and this was reinforced by the stern's 80 mm thick splinter plating. These two transverse bulkheads, together with the longitudinal side belt and armoured upper deck, defined the external citadel (armour box) which protected the ship outboard areas. The internal raft accorded additional protection to the vitals, as we shall see when examining the horizontal protection scheme.


Horizontal protection.
The upper armour deck was 50-80 mm (Wh) thick and covered most of the ship's length (from frame 10.5 to 224). The 80 mm (Wh) platting was located from forward to aft of each pair of main turrets, around the secondary turrets, and under the control tower. A lightly protected 20 mm (St 52) thick battery deck was located 2.4 meters beneath the upper deck. The third armour deck was 10.3 meters above the keel, and featured the classic "turtle deck" arrangement with sloped edges. The amidships flat portion of the main armour deck marked the top of the internal armoured raft, and it was normally situated about one meter above the designed waterline. It was 80 mm thick over the machinery and 95 mm over the magazines. The outboard sloped portion of this deck was 110-120 mm (Wh) thick, and inclined downward at about 22° from the horizontal to where it met the lower edge of the main armour belt under the waterline. The armour deck's slopes presented attacking shells that penetrated the side armour with impact obliquities of up to 68°, and were 110 mm thick around the machinery and 120 mm thick adjacent to the magazines. Subsequent analysis indicated that the combined external citadel and internal raft could provide the vitals with relative immunity from 406 mm/45 APC shells fired at point-blank range.
The bow region was protected by a 20 mm thick fourth upper platform deck, and the stern had an armoured turtle deck of 110 mm which protected the steering gear.

Horizontal Deck Protection

	Over machinery	Over magazines	Bow	Stern
Upper deck:	50 mm (Wh)	80 mm (Wh)	50 mm (Wh)	50 mm (Wh)
2nd battery deck:	20 mm (St 52)	20 mm (St 52)	12 mm (St 52)	8-12 mm (St 52)
3rd armour deck (centre-slopes):	80-110 mm (Wh)	95-120 mm (Wh)	-	-
4th deck:	-	-	20 mm (Wh)	110 mm (Wh)
Total (centre-slopes):	130-160 mm (Wh)	175-200 mm (Wh)	70 mm (Wh)	160 mm (Wh)

Turrets.
The main battery turrets were 130-360 mm KC. The barbettes were 340 mm KC over the upper deck, and 220 mm KC below it down to the third armour deck. The thickness was reduced because of the protection given by the 80 mm (Wh) upper deck and 145 mm upper citadel plating. In terms of US Class A armour, the effective resistance of the 340 mm barbette armour was 390-405 mm.

The secondary battery turrets were protected by 20-100 mm Wh plates. Their barbettes were 80 mm Wh above the upper deck. Below the upper deck the barbettes' armour could be reduced to 20 mm because the 80 mm Wh thickness of the upper deck and the 145 mm thickness of the citadel armour provided additional protection. Moreover, the secondary turrets' ammunition trunks were protected by the main side belt as they descended, and thus there was no need to extend their heavy barbette armour downward.

Command posts. Conning towers.
The forward conning tower had 350 mm KC walls and a 220 mm KC roof. The rangefinder cupola, on top of the conning tower, had 200 mm KC walls and a 100 mm KC roof. The conning tower was connected with the armour deck by a communications shaft of 85 cm in diameter and 220 mm KC walls.
The after conning tower was not so heavily protected. Its sides were 150 mm KC, the roof was 50 mm KC, and the communications shaft running to the lower decks was 70 cm in diameter and 50 mm KC thick. The aft range finder cupola had 100 mm KC walls, and a roof of 50 mm KC.
The foretop command post was lightly protected because it was so high in the foremast that heavy armour would cause stability problems. The walls were 60 mm KC and the roof was 20 mm KC. The cupola's walls were 30 mm KC, and the roof was 20 mm KC.

Command post Forward After Foretop Walls 350 mm 150 mm 60 mm Roof 220 mm 50 mm 20 mm Floor 70 mm 30 mm 20 mm Left photo: The forward conning tower as seen from the searchlight platform. Its walls were 350 mm thick and the roof 220 mm. The range finder cupola has not yet been installed.

Underwater protection and compartmentation.
The hull was divided into 22 watertight compartments, 17 of which were located within the citadel (sections III-XIX). The area above the waterline between the armour and upper deck was divided into three large sections by 30 mm (Wh) thick port and starboard longitudinal splinter bulkheads. These were located 3-5.4 meters inboard of the side belt, and formed 51 armoured cells within the upper citadel by being transepted by transverse bulkheads. This entire array was divided in the horizontal plane by the intervening battery deck, which resulted in 102 cells. Many of these cells were subdivided by transverse and longitudinal bulkheads, with the compartmentation between the main and battery deck being in the region of 100, and above that number if one includes the compartments fore and aft of the citadel. However, the compartmentation above the armour deck far exceeds that below it.
The underwater hull formed the vast bulk of the internal armoured raft, and it was protected from torpedo and mine damage by 45 mm Ww port and starboard longitudinal bulkheads. These bulkheads were vertical instead of sloped as in the Scharnhorst Class, and could interact with the sloped armour deck above them to increase the vitals' protection against shells, although their main purpose was to limit underwater damage.
The distance between the torpedo bulkhead and the outer hull was 5.4 meters amidships (sections IX-XII), although it tapered to about 3 meters abeam turrets Anton (section XVIII) and Dora (section IV). German design philosophy attempted to avoid overly wide torpedo protection systems on the grounds that they placed a great burden on stability when flooded. Indeed, the effects of outboard flooding increase as a function of the square of a given water mass's distance from the centreline. A traditional gas expansion/counterflooding space was placed outboard of three liquid-loaded compartments which abutted the main torpedo bulkhead. The fuel oil and feed water these compartments contained, helped slow fragments as well as disperse and absorb the shock waves generated by underwater blasts. The outer void was used for counterflooding. Overall, the torpedo defence system was designed to resist a TNT charge of 250 kg (550 lbs) although its resistance actually proved to be considerably higher than that.¹⁾
The compartmentation within each level of the internal raft was very extensive. There were 3-4 decks above the compartmented double bottom, and each of these was intricately subdivided. For example, the upper platform deck included over 250 compartments, while the middle platform deck had a nearly equal number. The lower platform deck was subdivided into over 200 compartments, and the fuel, potable water, and void spaces below this were even more finely divided. In fact, the double bottom had a depth of 1.7 meters between frames 77.3-154.6, and this provided some protection against underwater explosions from mines.
Finally, the hull was equipped with the MES (Magnetischer Eigenschutz) "magnetic self-protection system". This consisted of a series of cables that demagnetised the ship's hull in defence against magnetic mines and torpedoes.

	Distance between torpedo bulkhead and outer hull	Torpedo bulkhead
Turret A (section XVIII)	3 meters	45 mm (Ww)
Turret B (section XVI)	3.5 meters	45 mm (Ww)
Amidships (sections IX-XIII)	5.4 meters	45 mm (Ww)
Turret C (section VI)	3.8 meters	45 mm (Ww)
Turret D (section IV)	3 meters	45 mm (Ww)

---

1) According to “Technical Report No. 222-45. Loss of the Battleship Tirpitz on 12 November 1944”, the torpedo defence system onTirpitz was designed to withstand about 660 pounds (300 kg) of German hexanite.